Farm Equipment - Is the measurement available for my

Print Page | Close Window

Is the measurement available for my

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=12344
Printed Date: 31 Jan 2025 at 5:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Is the measurement available for my

Posted By: rasman57
Subject: Is the measurement available for my
Date Posted: 12 May 2010 at 3:03pm

D-14? Distance from the bell coupler to the snap coupler arms if they were hanging basically level out. the back? I was thinking it was close to 48 inches but can't remember. I am building a snap coupler rake and need to get the lift straps on but forgot to measure how far from the center of the bell coupler back to where the straps would be pretty close to plumb and not leanin way forward or way back to start with.

I am at home in the shop in IL and old alice is up in MI at my property Appreciate the help. BTW , thanks to D. Spears for helping me find that flat bar eye couple. Nice CA he has set up real nice and sure is lookin good! Ralph

Replies:

Posted By: DSpears N IL
Date Posted: 12 May 2010 at 9:16pm

Hi Ralph!

It was great to meet you & help you on your project!

I measured my setup on the CA snap coupler eye to straight up lift arms. 38"

When I corrected the length of the plow drawbar from a WD to a CA it needed to be shortened by 5".

My guess would be for your D-14 to be 43" from the tip of the snap coupler eye!

Maybe someone can get a better measurement!

Hope that this helps!

DeWayne

Posted By: rasman57
Date Posted: 12 May 2010 at 9:56pm

DeWayne,

Thanks again for your help. I think 42-43" is just about right for that D-14. I'll let you know how it turns out.

Ralph