Series iv 3 point
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=123165
Printed Date: 12 Apr 2025 at 1:59am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Series iv 3 point
Posted By: Travis2766
Subject: Series iv 3 point
Date Posted: 10 May 2016 at 8:36pm
|
I'm going to convert my d17 iv from the snap coupler to 3 point, I want to just build the conversion myself (I already have all the steel) but does anyone have some dimensions for the pieces? Mainly the tug arm length and the cross piece that mounts to the drawbar. Thanks ------------- 190XT Series III, D17 Series IV, D15 Series II, All Crop 66 and a whole mess of equipment. |
Replies:
Posted By: Travis2766
Date Posted: 11 May 2016 at 9:03pm
|
Nobody? ------------- 190XT Series III, D17 Series IV, D15 Series II, All Crop 66 and a whole mess of equipment. |
Posted By: CTuckerNWIL
Date Posted: 11 May 2016 at 9:08pm
I don't think there is a "cross piece" on a series IV. Why not find a 170 parts tractor and have everything heavy duty factory? ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Travis2766
Date Posted: 11 May 2016 at 9:25pm
|
I would love to find a factory 3 point but I can't justify spending $500 on a factory rear end and another $250 to ship it or spend a day driving 300 miles to get it, seems like no one in central Wisconsin sells anything if it's Allis Chalmers. Most would rather watch it rust away in the fence line and be able to say "I have one of those" than sell it to somebody who may actually use it. Don't get me wrong there are some great guys on this site willing to go out of their way but seems to be hard to find anything around central Wisconsin. ------------- 190XT Series III, D17 Series IV, D15 Series II, All Crop 66 and a whole mess of equipment. |
Posted By: SteveM C/IL
Date Posted: 11 May 2016 at 9:53pm
| Didn't they say 170-185 all will work? When you get to be my age(did I say that?)you'll understand why it makes sense to do what it takes to get the real thing and be done with it. No offence intended. |
Posted By: DSeries4
Date Posted: 11 May 2016 at 9:59pm
Yep. D17 IV, 170, 175, 180 and 185 are all basically the same and are pretty much a bolt on operation. Your tractor will be worth more when you go to sell it too. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
SteveM C/IL wrote:Posted By: Travis2766
Date Posted: 19 May 2016 at 12:00pm
|
Does anybody have a 3 point they would like to sell? ------------- 190XT Series III, D17 Series IV, D15 Series II, All Crop 66 and a whole mess of equipment. |
Posted By: AC200Puller
Date Posted: 19 May 2016 at 5:44pm
| Will one from an early 7000 fit? If so I have one for 600 bucks. |
Posted By: AC200Puller
Date Posted: 19 May 2016 at 6:31pm
|
Whoops won't work has dual speed pto. |
Posted By: JoeO(CMO)
Date Posted: 19 May 2016 at 8:09pm
|
I have a factory 3 point, still on the tractor, a 170. Located in central Missouri ------------- |
Posted By: Stan R
Date Posted: 19 May 2016 at 9:31pm
| I can get you the dimensions, but not until next weekend as the D17 IV is 100 miles away and won't get out to see it until then. Let me know. I can get you pics also. 3 pt is standard on it. |
Posted By: alleyyooper
Date Posted: 20 May 2016 at 7:05am
|
Stan R, I would like the demotions and some close up pictures if your able. I found lots of Home built 3 point hitches by googleing D17 home made hitches. Problem is no demotions and no close up pictures. :D Al |
Posted By: michaelwis
Date Posted: 22 May 2016 at 6:32am
Have u tried heitmans salvage ------------- WD WD45 DIESEL D 14 D-15 SERIES 2 190XT TERRA TIGER ac allcrop 60 GLEANER F 6060 7040.and attachments for all Proud to be an active farmer |
Posted By: JC-WI
Date Posted: 22 May 2016 at 9:57am
|
Mark Heitman 715-673-4829 Larry Wright might have something, or know of someone...but he is in the northwest corner by Luck Wi. ------------- He who says there is no evil has already deceived himself The truth is the truth, sugar coated or not. Trawler II says, "Remember that." |
Posted By: Gary Burnett
Date Posted: 22 May 2016 at 10:12am
|
I have a Series IV rear with a complete 3pt but I'm in Virginia |
Posted By: HD6GTOM
Date Posted: 22 May 2016 at 11:45am
| Joe I would be interested in the complete 3 point hitch for a D17 series 4. Hd6gTom. If this fellow is not interested, Pm me location etc |