Farm Equipment - U-40 Power unit

Print Page | Close Window

U-40 Power unit

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=12316
Printed Date: 31 Jan 2025 at 4:40am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: U-40 Power unit

Posted By: SteveC
Subject: U-40 Power unit
Date Posted: 11 May 2010 at 6:59pm

I have a U-40 Power unit. It runs good, starts after about two revolutions. It was used to power several grist mills. Any idea what it is worth? Would like to sell it. I also have three Meadows Grist mills (24",30" and a 36").Also have two line shafts, an elevator unit and belts.

Replies:

Posted By: BrettPhillips
Date Posted: 11 May 2010 at 7:18pm

Where are you located?

Posted By: SteveC
Date Posted: 11 May 2010 at 7:48pm

NE Georgia, about 50 mile south of the NC line.

Posted By: Fred in Pa
Date Posted: 11 May 2010 at 9:03pm

Need more Info.

Posted By: SteveC
Date Posted: 12 May 2010 at 4:51pm

What else would you like to know? Runs good, don't smoke, don't miss.

Posted By: Fred in Pa
Date Posted: 12 May 2010 at 7:35pm

Electic start? side panels,Radi . condition . Picture. Phone #

Posted By: SteveC
Date Posted: 12 May 2010 at 8:24pm

It's a hand crank start, not elec. Have both side panels, both in good condition. Radiator is good, not leaking. Condition is good, good compression, don't knock or smoke. 706-865-6459. Send me your Email address and I will send pictures

Posted By: SteveC
Date Posted: 12 May 2010 at 8:24pm

Cleveland, GA 30528

Posted By: TMiller/NC
Date Posted: 12 May 2010 at 8:36pm

Are the grist mills complete? Tim

Posted By: SteveC
Date Posted: 12 May 2010 at 9:31pm

I was wrong before. I Have a 20", 24", and a 30". The 24" is missing the metal hopper on the top. Everything else is complete. I was try to send pictures to others but having problems with my ISP provider, will have to call them tomorrow to see what the problem is. My number is 706-865-6459 if you have any questions.