Garden Tractors - 616/620/720 cooler line

Print Page | Close Window

616/620/720 cooler line

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=123067
Printed Date: 30 Nov 2024 at 5:27am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 616/620/720 cooler line

Posted By: coggonobrien
Subject: 616/620/720 cooler line
Date Posted: 09 May 2016 at 9:35am

what kind of hose are you guys using? Also what ID and if you know how much I need.

Thanks

David

Replies:

Posted By: coggonobrien
Date Posted: 12 May 2016 at 7:50am

anybody?

Posted By: HudCo
Date Posted: 12 May 2016 at 10:35am

i used napa # atp 14864 1/2 " transmission oil cooler hose 300psi

Posted By: coggonobrien
Date Posted: 12 May 2016 at 10:37am

Hud you don't remember how much you needed do you?

Posted By: HudCo
Date Posted: 12 May 2016 at 10:51pm

no but it s only a about 2.50 a foot i think four foot piece will do it

Posted By: coggonobrien
Date Posted: 13 May 2016 at 7:17am

gotcha, i've noticed after mowing the first time since putting the engine back in that there was a drip on the center pulley of the mower deck so I assumed i have a line that either crack or slipped off the cooler. I went to start the mower and raise the deck and had no hydraulics. Turns out that in addition to the front leak somewhere the suction line that feeds the hydraulic filter had come off at the filter housing. Don't know how that happened as I had mowed 3.5hrs parked it fine and then suddenly it was off. Guess I should replace that one too and it doesn't like it will be much fun to play with the lower connection.