power director
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=122877
Printed Date: 28 Nov 2024 at 6:13am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: power director
Posted By: 200 allis
Subject: power director
Date Posted: 04 May 2016 at 7:17pm
| Does anyone have a diagram on how to delete power director and still use hi and low |
Replies:
Posted By: Dans 7080
Date Posted: 04 May 2016 at 8:03pm
|
The power director is the high and low. ------------- When someone tells you Nothings Impossible, Tell them to slam a revolving door |
Posted By: 200 allis
Date Posted: 04 May 2016 at 8:18pm
| I want to make it mechanical shift |
Posted By: bsallis180
Date Posted: 05 May 2016 at 8:45pm
| If you eliminate the hydraulic power director. Then you have to replace it with the coupler to lock the shafts together Or a small gearbox but you have to stop and change gears. |
Posted By: 200 allis
Date Posted: 06 May 2016 at 6:54am
| I looking for a coupler would prefer hi and lo but low would be good for now |
Posted By: bsallis180
Date Posted: 06 May 2016 at 7:06am
| Need to get a hold of Mac on her he has them |
Posted By: injpumpEd
Date Posted: 06 May 2016 at 9:19am
|
I think DR Allis, or OPS heads has what you need. How much power were you still getting away with using the PD still? ------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |
Posted By: CAL(KS)
Date Posted: 06 May 2016 at 9:21am
|
Mack sells mechanical boxes for 190
found it here is what Mack is selling http://www.allischalmers.com/forum/forum_posts.asp?TID=63632&KW=gear+boxes&PID=498502&title=macks-gearbox#498502" rel="nofollow - http://www.allischalmers.com/forum/forum_posts.asp?TID=63632&KW=gear+boxes&PID=498502&title=macks-gearbox#498502  ------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: O.P.S. Heads
Date Posted: 06 May 2016 at 12:21pm
| If you want the use of both the high and low range but do not want the issues of a potential P.D. clutch failure or slippage contact Dr. Allis. This is not an on the go shift, but you can choose either high or low range. Mack's gearbox eliminates low range but either speeds up or slows down the remaining 4 gears. Just depends on what you want to do. |
Posted By: 200 allis
Date Posted: 06 May 2016 at 6:12pm
| I want to eliminate powe director so I don't have problems down road I would like to use hi and lo to keep my options open but right now just running 7th gear. |
Posted By: MACK
Date Posted: 29 May 2016 at 10:31pm
| It is wise to get rid of PD clutch. With RPMs it is a bomb waiting to expand. MACK |