Bell housing blanket, shield.....????
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=122588
Printed Date: 24 Nov 2024 at 1:53pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Bell housing blanket, shield.....????
Posted By: studer automotive
Subject: Bell housing blanket, shield.....????
Date Posted: 29 Apr 2016 at 5:07am
And ideas on a cost effective way to make something for my 185? It's a bone stock farm tractor except at some pulls it requires a safety shield , blanket safety cover of some sort for the flywheel. Any body got any pics? Was thinking a cobbling together some
Plates....
-------------
a-c 185-d y/r cab turbo soon
99 f-250 7.3 4x4
86 mustang5.0 owned since 8/93
|
Replies:
Posted By: Larry W.
Date Posted: 29 Apr 2016 at 8:19am
|
My opinion, if it's stock , make a shield, any blankets that you would get will be pretty difficult to use if you want to keep your fuel tank and brackets stock.
|
Posted By: PaulB
Date Posted: 29 Apr 2016 at 10:05am
I don't know the current requirements. My Turbo CA has a blanket that was made by "Chute Metal". It's wide enough to cover all the components of the clutch. Early on the NTPA requirements were a 3/8" x 6" minimum 360 degrees surrounding the clutch. Any place that is was not solid metal and bolted together it must have at least three 3/8" grade 5 bolts per joint.
-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
Posted By: Larry(OH)
Date Posted: 02 May 2016 at 12:04pm
You must be pulling at Wooster this weekend? I bought 2 blankets for my WC and took them back. I am going to fab a bracket to go completely around it. I do not need it pulling the 4mph, so screw it and them right now. Thanks to a dumb A$$ with a JD and a stock flywheel, things have gotten this way
-------------
'40 WC puller,'50 WD puller,'50 M puller '65 770 Ollie
*ALLIS EXPRESS contact*
I can explain it to you, BUT I cannot understand it for you!!
|
Posted By: studer automotive
Date Posted: 14 May 2016 at 11:12am
Exactly,I didn't do anything. I ran it the way it was. I'm looking at a decent pair of 18.4-34's on pressed steel tims this weekend. Short tire just kill that 185, it spins out way to easy at every pull.
-------------
a-c 185-d y/r cab turbo soon
99 f-250 7.3 4x4
86 mustang5.0 owned since 8/93
|
|