Starter for D15
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=122481
Printed Date: 28 Apr 2025 at 9:39am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Starter for D15
Posted By: WD45
Subject: Starter for D15
Date Posted: 26 Apr 2016 at 8:16pm
Starter for D15 series II gas Delco Remy part number 1107758.
Does this number cross over for a starter from a different source ?
eg NAPA etc.
-------------
Fred Dunlop, G,B,CA, WC,WF, 3 WD45`s,gas, diesel and LP,U,D10 series III, D12,D14,D15 SERIES II,D17 Series IV in Gas and Diesel ,D19 GAS and D21,170 185,210 ,220 an I-600 8070 fwd, 716H and 1920H
|
Replies:
Posted By: jaybmiller
Date Posted: 26 Apr 2016 at 8:25pm
Steve at B&B will know....
be careful.. might be 6 volt or 12 volt.
this is assuming D-15 is similar to D-14...
count teeth on pinion gear 9 teeth=12 volt, 10 teeth 6 volt
I KNOW 6 volt starters for D-14 have metal 'brush band' on them and 10 teeth and will NOT fit a real 12 volt D-14.....
Jay
-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
Posted By: DSeries4
Date Posted: 26 Apr 2016 at 9:37pm
All D15s are 12 volt, so no problems there. A local shop should be able to rebuild yours.
-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
Posted By: DiyDave
Date Posted: 26 Apr 2016 at 9:39pm
|
Some times, the hard thing to come up with is the starter nose piece...
|
|