Farm Equipment - Torque specs and tightening order for Allis G

Print Page | Close Window

Torque specs and tightening order for Allis G

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=12203
Printed Date: 31 Jan 2025 at 12:04am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Torque specs and tightening order for Allis G

Posted By: Skuter
Subject: Torque specs and tightening order for Allis G
Date Posted: 09 May 2010 at 3:51pm

Getting ready for pulling off the head and wondering if any one had the torque specs and tightening order for it. Any other constructive insight would be appreciated.

Thanks,

Skuter

Replies:

Posted By: Dave(inMA)
Date Posted: 09 May 2010 at 4:36pm

Per the I&T Guide....."tighten head bolts progressively and from the center outward. Retighten after engine has reached operating temperature. Tighten the 3/8 inch cap screws to 53-57 ft. lbs. torque."

-------------
WC, CA, D14, WD45

Posted By: Morris Hill NC
Date Posted: 09 May 2010 at 6:48pm

Get some copper washers from Harbor Freight for head bolts
If you dont you might have leaks around bolts. Thats what happened to
mine.
Morris