nos plow parts id and sale
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=12193
Printed Date: 06 Mar 2025 at 5:25pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: nos plow parts id and sale
Posted By: Ed&Sherry
Subject: nos plow parts id and sale
Date Posted: 09 May 2010 at 1:07pm
| we are helping remove some new stored AC parts from a dealership that went out in the late 60s , today will be plow parts, there is 2 mounted frams ,a 2 and 3 bottom # are 383268 and 383271. there are 2 frogs and a moldboard #309244 also many linkage parts with # 383011 and 383597. can anyone help id these and any intrest in buying some or all ? thanks Ed |
Replies:
Posted By: GlenninPA
Date Posted: 09 May 2010 at 2:15pm
|
Ed,
That moldboard is for a #124 12"-14" bottom. Does it still look like a dealership inside? I am wanting to get some pictures of what the insides of old local dealerships looked like, and Allis was big over there in Rome/Windham area. Who was the dealer? PM me if you want.
Glenn
|
Posted By: Gerald J.
Date Posted: 09 May 2010 at 6:02pm
|
I've moved my plow books faster than my computers so I can't answer the IDs for a while. Gerald J. |
Posted By: Skyhighballoon(MO)
Date Posted: 09 May 2010 at 8:11pm
|
Gerald, I already checked the book, none of those 383xxx numbers are in the plow bottom parts book we have...must be for newer bottoms than a 387. Mike
------------- 1981 Gleaner F2 Corn Plus w 13' flex 1968 Gleaner EIII w 10' & 330 1969 180 gas 1965 D17 S-IV gas 1963 D17 S-III gas 1956 WD45 gas NF PS 1956 All-Crop 66 Big Bin 303 wire baler, 716H, 712H mowers |
Posted By: Ed&Sherry
Date Posted: 09 May 2010 at 8:34pm
| this might help, the 383xxx # are metal tag # ,as Glenn stated the moldboard was for a #124 than the whole pile is the same model. i have some pic if someone needs or could post thanks Ed |
Posted By: Gerald J.
Date Posted: 09 May 2010 at 9:14pm
|
The 383s might also be plow frame parts, not plow bottom parts. I can't check now. Gerald J. |
Posted By: Chalmersbob
Date Posted: 09 May 2010 at 10:07pm
|
Hi Ed, is that a cast mouldboard? did you get any shares?
Thanks, Bob
|
Posted By: Ed&Sherry
Date Posted: 10 May 2010 at 4:22am
| Bob ,yes i beleave it is cast and no shares found so far Ed |
Posted By: GlenninPA
Date Posted: 10 May 2010 at 9:48pm
|
Ed,
When are you in the house after chores? I am thinking to give you a call tomorrow.
Glenn
|
Posted By: Fred in Pa
Date Posted: 11 May 2010 at 6:44am
| Chalmers Bob do you need 124 bottom shears? PM if you do. |
Posted By: cbt1124
Date Posted: 13 May 2011 at 9:23pm
ED,
Do you still have that Moldboard p/n 309244? How about some plow points for the same plow? I have been doing quite a few gardens this year with my B and the moldboard on the 2nd bottom snapped off swinging around a tree stump. My points are worn quite well too.
Thank you in advance,
Steve |
Ed&Sherry wrote:Posted By: JoeO(CMO)
Date Posted: 14 May 2011 at 6:17am
|
If I remember correctly the metal tag numbers were "Bundle " numbers. ------------- |
Posted By: Ed&Sherry
Date Posted: 15 May 2011 at 10:07am
| steve , yes we still have that Moldboard p/n 309244 |
Posted By: Farmer Roy
Date Posted: 15 May 2011 at 7:28pm
| Most items shipped from LaPorte plant had metal tags for shipping dept. to use to get complete unit bundles so dealer had complete unit as they had ordered. I spent many hours in LaPorte waiting for my load to get picked for loading. |
Posted By: JimIA
Date Posted: 15 May 2011 at 11:55pm
|
Farmer Roy, that is interesting. I know the LaCrosse built tillage equipment had label tags on them. Ive seen alot of those tags on plows, discs, drills and misc but never on LaPorte built items. Will have to look over a few more of my machines. Jim |