need a 3pt bolt size
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=121262
Printed Date: 02 Oct 2024 at 7:29pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: need a 3pt bolt size
Posted By: coggonobrien
Subject: need a 3pt bolt size
Date Posted: 01 Apr 2016 at 7:10am
|
Does anybody know what size bolt goes into the 3 pt bracket that you see in this ebay posting? I'm throwing a 3pt on my 2nd 616 and did not receive those bolts. Would those bolts already be in my non 3pt unit? Thanks David http://www.ebay.com/itm/Allis-Chalmers-616-620-720-Simplicity-4040-4041-9020-Three-Point-Lift-Arm-/222069303294?hash=item33b45ca7fe:g:iDsAAOSwI3RW-1bY |
Replies:
Posted By: ac720nut
Date Posted: 01 Apr 2016 at 9:54am
| I'm sure I could tell you but can't openposting |
Posted By: coggonobrien
Date Posted: 01 Apr 2016 at 10:09am
| There are 2 brackets, 1 for each lower link the bolts to the tractor and a pin goes through them for the lower links to pivot off of. I'm need the info on the 2 bolts that go through each of the brackets. |
Posted By: mnoonan-NEWI
Date Posted: 01 Apr 2016 at 10:25am
|
1/2"-13 x 2" Hex Cap Screw per the parts book. (2) per side. I would use grade 8. ------------- AC CA, Ferguson TO-20, Ford NAA, M-M BG, AC #3 Mower, SC Plow, PH Digger, AC 720's with Ark 700 loader & Brantly Backhoe, "Mini B" w/flathead Ford V8 |
Posted By: steve(ill)
Date Posted: 01 Apr 2016 at 12:34pm
 ------------- Like them all, but love the "B"s. |
Posted By: coggonobrien
Date Posted: 01 Apr 2016 at 12:37pm
| Thanks! |