Print Page | Close Window

OT Cub Cadet 1811

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=120792
Printed Date: 30 Nov 2024 at 5:25am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: OT Cub Cadet 1811
Posted By: Charlie175
Subject: OT Cub Cadet 1811
Date Posted: 23 Mar 2016 at 5:35am
I have a 1989 Cub 1811 with the twin Kohler 18hp motor.
Last year it started not charging, actually showing a discharge when run at operating RPM.
I've checked my connections, anything else obvious that I am overlooking?


-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD



Replies:
Posted By: HudCo
Date Posted: 23 Mar 2016 at 8:57am
is it a kt or a magnum ?  


Posted By: Charlie175
Date Posted: 23 Mar 2016 at 9:12am
M18

I do have a service manual, I need to dig it out.


-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD


Posted By: Steve in NJ
Date Posted: 23 Mar 2016 at 12:01pm
A lot of common problems I've found with the twin Kohlers and Commands, is a broken stator wire from vibration, stator failure, or VR issue. Another problem I've found was bad grounds.. HTH
Steve@B&B

-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife


Posted By: HudCo
Date Posted: 25 Mar 2016 at 9:33am
 took awhile to get back              what steve said,    and also check the key switch  connections to make sure power is making it back to the battery.   magnun should not draw of the battery  after it has been started unless it has a afterfire solniod.  out side wires on voltage reg are a c from stator middle wire on reg will be d c to battery                          did not look up spec but you should have prob 25 to 30 vac to reg at high idle and at least 13.8 vdc out



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net