Farm Equipment - CA engine overhaul question

Print Page | Close Window

CA engine overhaul question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=120586
Printed Date: 28 Sep 2024 at 3:15pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: CA engine overhaul question

Posted By: Morgan in AR
Subject: CA engine overhaul question
Date Posted: 18 Mar 2016 at 8:28pm

Specifically about the bushing that the governor shaft rides in. The original one was split and had four notches in it, probably for oil. I ordered a new aftermarket one, and it is soild, with no notches. I had the block at the machine shop to have cam bearings installed, and this bushing. The machinist said that he thought the new bushing fit too loose, so I had him put the old one back in. I test fit the shaft and it seems tight now. What's the deal? How do you install them, and do I need to get one from agco. Thanks -Morgan

-------------
If we loose freedom here there is no place left to escape to. This is the last stand on earth. -Ronald Reagan