inline injection pump
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=120280
Printed Date: 28 Nov 2024 at 6:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: inline injection pump
Posted By: shaunAC220
Subject: inline injection pump
Date Posted: 12 Mar 2016 at 6:38pm
|
im thinking about putting a bosch inline injection pump on my 220 would there be a lot of fabrication work? and would it fit next to the oil cooler?
|
Replies:
Posted By: tbran
Date Posted: 12 Mar 2016 at 10:37pm
there was a front cover on facebook - some where for sale.., mybe the few the proud the orange???
-------------
When told "it's not the money,it's the principle", remember, it's always the money..
|
Posted By: DougG
Date Posted: 13 Mar 2016 at 6:20am
|
Someone on here has done that, Peterson I think, he had lot of pictures of the process
|
Posted By: Peterson
Date Posted: 13 Mar 2016 at 7:24am
Wont fit with the original block. Needs to be the new style block from a 7000-8000 tractor.
-------------
7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2
|
Posted By: shaunAC220
Date Posted: 13 Mar 2016 at 9:04am
|
maybe an aftermarket oil cooler?
|
Posted By: Peterson
Date Posted: 13 Mar 2016 at 9:10am
I believe some block castings are in the road.
-------------
7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2
|
Posted By: injpumpEd
Date Posted: 13 Mar 2016 at 11:38am
the main oil galley is in the way of the governor. I switched my tractor over to the later style block when I wounded it last summer. The A pump fits really nice on the 7000 series (and newer) block.
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: ACFarmer
Date Posted: 13 Mar 2016 at 5:12pm
It will fit, it just takes a little more. Ran an A pump on the original block in my 210.
-------------
Making A living everyday farming with and working on Allis Equipment
|
Posted By: SteveM C/IL
Date Posted: 28 Mar 2016 at 7:37pm
|
seen a 21 years ago with an A pump,course that oil cooler has to go...
|
|