Farm Equipment - 220 pto hollow shaft

Print Page | Close Window

220 pto hollow shaft

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=120190
Printed Date: 19 Aug 2025 at 12:46pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 220 pto hollow shaft

Posted By: Joe(OH)
Subject: 220 pto hollow shaft
Date Posted: 10 Mar 2016 at 6:50pm

Working on a 220. The pressure plate splines were shot and looking at the hollow shaft that drives the pto the teeth are about half worn out. Is this part available? Anyone have one? Looks like its AGCO part #70253242.

Also, I measured the fly wheel to check for wear. I was told it should be 2.042. Mine measures 2.049. Is seven thousands enough to worry about?

Thanks!

-------------
Life is simpler when you plow around the stump.

Replies:

Posted By: DrAllis
Date Posted: 10 Mar 2016 at 7:01pm

Hi-Capacity clutch rebuilders(Iowa) can probably refurbish it with a new splined end and then change your pressure plates hub to match the new repaired shaft. They'd likely make it the same as an IH 10-1466 tractor, which are commonly repaired like this.

Posted By: Joe(OH)
Date Posted: 10 Mar 2016 at 7:56pm

Doc, do you know if it can be removed through the torque housing or will the transmission have to be removed?

-------------
Life is simpler when you plow around the stump.

Posted By: Kevin in WA
Date Posted: 10 Mar 2016 at 8:02pm

Joe, the hollow shaft will come out the front.

Posted By: MACK
Date Posted: 10 Mar 2016 at 9:13pm

If you replace the clutch, have the flywheel resurfaced and new pressure plate. MACK