Disc brakes
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=119901
Printed Date: 21 Feb 2025 at 9:37am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Disc brakes
Posted By: Acllss puller
Subject: Disc brakes
Date Posted: 04 Mar 2016 at 9:09pm
| What are you guys using for a hubs to use as disc brakes on a190 rear end and how big of a diameter rotor can be used. Any ideas would be helpful thanks.I was thinking of machining the factory hub off then drilling it for whatever rotor we use. |
Replies:
Posted By: DrAllis
Date Posted: 04 Mar 2016 at 9:37pm
| That would be OK fine. Use the largest diameter you can for best results. |
Posted By: Larry W.
Date Posted: 04 Mar 2016 at 9:54pm
| I just saw a settup on a 190 today, they utilized crower clutch discs for the rotors , worked really well, and a very successful tractor. |
Posted By: bsallis180
Date Posted: 05 Mar 2016 at 9:46am
| http://www.allischalmers.com/forum/forum_posts.asp?TID=67825&title=190-brakes |
Posted By: Acllss puller
Date Posted: 06 Mar 2016 at 5:09pm
| Brett did you post something or pics didn't come through |
Posted By: bsallis180
Date Posted: 06 Mar 2016 at 5:14pm
| Just a link of a old thred " copy and paste" Not sure how to make it a "true" link |
Posted By: bradley6874
Date Posted: 06 Mar 2016 at 8:00pm
|
I asked about this that was the post from the past I used the old inner hub as a pattern and made an adapter to put ford Tauris rooters and calipers on used summit master cylinders they will lock the wheels up instantly
the only draw back is I have no parking brake
------------- You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul |
Posted By: Bob C IL
Date Posted: 08 Mar 2016 at 11:23am
| if I could get pics to send off phone I'd send my homemade setup and works great!! |
Posted By: Bob C IL
Date Posted: 08 Mar 2016 at 11:24am
| I could text or email if someone wants to post em |
Posted By: Bob C IL
Date Posted: 08 Mar 2016 at 11:29am
|
Posted By: Bob C IL
Date Posted: 08 Mar 2016 at 11:37am
| It let me do one pic only but it's Harley rotor and 4 piston caliper from a road glide and master cylinders from jegs |
Posted By: bradley6874
Date Posted: 08 Mar 2016 at 9:15pm
|
if I do it again I'm going to use international rotors mounted to the back of my wheel hub hopefully I will have a better feel as the current set up has induction factor
------------- You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul |
Posted By: AaronSEIA
Date Posted: 09 Mar 2016 at 6:08am
|
You could put a microlock in to have a park brake, couldn't you? AaronSEIA |
Posted By: MACK
Date Posted: 13 Mar 2016 at 8:09pm
| I used rooters from VW rabbit bolted to 190 disc splines. MACK |