Att. Tracy Martin- Speco 3 point
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11964
Printed Date: 30 Jan 2025 at 1:06pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Att. Tracy Martin- Speco 3 point
Posted By: David Maddux
Subject: Att. Tracy Martin- Speco 3 point
Date Posted: 05 May 2010 at 12:03pm
Tracy: Here is the pictures of my Speco 3 point units, one mounted and one not.
|
Replies:
Posted By: David Maddux
Date Posted: 05 May 2010 at 12:04pm
 |
Posted By: David Maddux
Date Posted: 05 May 2010 at 12:05pm
 |
Posted By: Larry(OH)
Date Posted: 05 May 2010 at 8:42pm
|
Dave/ Tracey. That looks like it BUT It does not have anything to go snap into the bell. It looks like it bolts to back of tractor or something. It also uses a different type top link that goes around shaft on back. Its about a foot long. I see how the extra links hook to the lift arms, and the balls with different size holes in them.. The top link wheel is not nearly that big on this one. Same paint but it says AC 1423 on it where I can see 429 on yours ------------- '40 WC puller,'50 WD puller,'50 M puller '65 770 Ollie *ALLIS EXPRESS contact* I can explain it to you, BUT I cannot understand it for you!! |
Posted By: David Maddux
Date Posted: 05 May 2010 at 9:11pm
| Tomorrow I will get that entire number off of the yellow unit. Dave. |
Posted By: Tracy Martin TN
Date Posted: 05 May 2010 at 10:48pm
| Thanks Dave, I had never seen one of those. Seems like alot of work . How does it work geometry wise? Does it bole to drawbar bail brackets? Thanks Tracy Martin |
Posted By: EricTn
Date Posted: 06 May 2010 at 6:41am
| Tracy, I have one of those on my D17D III. It was also on a D14 originally. Works great. Needs some tightening up. Mine doesn't have the braces from the top to the axle bolt, but may have soon. If you need to look at it let me know. Eric |
Posted By: David Maddux
Date Posted: 06 May 2010 at 6:48am
| It is very easy to install. Just snap into bell, install the pins that you install for a drawbar, and then bolt on the two braces on top. I didn't realize it used the two braces until I bought the second unit. It is very stable, you just tighten the sway bars to desired stability and nothing moves. It works perfect for my Bush Hog AT99. |
Posted By: Matt MN
Date Posted: 06 May 2010 at 7:14am
|
Does the traction booster still work with this type of 3 point? ------------- Unless your are the lead horse the scenery never changes!! |