Farm Equipment - D17 series iv distributor

Print Page | Close Window

D17 series iv distributor

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=119587
Printed Date: 09 Sep 2025 at 4:30am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D17 series iv distributor

Posted By: Travis2766
Subject: D17 series iv distributor
Date Posted: 27 Feb 2016 at 2:24pm

My distributor has too much slop in the shaft so I need to do something. I looked up the part number in the IT manual and started looking online. All the websites I've found say that that distributor goes up to 1965, mine is a 1967, question is which distributor was used on the 67 year? I would just look at the one on the tractor but someone has a couple coats of paint over the tag on it. Also can I just replace the bushings in the distributor?

-------------
190XT Series III, D17 Series IV, D15 Series II, All Crop 66 and a whole mess of equipment.

Replies:

Posted By: DSeries4
Date Posted: 27 Feb 2016 at 11:02pm

Steve of B&B rebuilds them. I would give him a call. Replacing the bushings won't help if the shaft is also worn.

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080