Farm Equipment - 170 early gas hydraulic and tranny oil

Print Page | Close Window

170 early gas hydraulic and tranny oil

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11891
Printed Date: 30 Jan 2025 at 2:36am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 170 early gas hydraulic and tranny oil

Posted By: KurtDE
Subject: 170 early gas hydraulic and tranny oil
Date Posted: 03 May 2010 at 9:19pm

I drained the oil and water out of the tranny, hydralics and power director, how much oil is needed and do i put it in the dipstick hole in the tranny to fill all three? The level was so low that it would not read on the dipstick.

Kurt

Replies:

Posted By: Chris/CT
Date Posted: 03 May 2010 at 9:34pm

24 qts in Transmission,26 qts in Torque Housing.Differential lubed from Trans.PS uses Hyd oil supply, might still have oil/water in PS unit

Posted By: Chris/CT
Date Posted: 03 May 2010 at 9:41pm

2 seperate filling locations, Hyd. oil left/forward of shifter. Trans on right. Did you hit all the drain plugs? Are you installing new Hyd oil filter?

Posted By: KurtDE
Date Posted: 04 May 2010 at 12:53pm

I think I have drained all points (3) and I have a new filter ready to go. Is the second fill point on the top of the tranny just in front and to the left of the shifter? this looks like the vent to me.

Kurt