616/620/720 Snow Blower Harness
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=118692
Printed Date: 02 Oct 2024 at 9:37pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 616/620/720 Snow Blower Harness
Posted By: coggonobrien
Subject: 616/620/720 Snow Blower Harness
Date Posted: 08 Feb 2016 at 7:23am
|
I pulled the harness that runs the factory electric snow blower chute off my 2nd 616 while I had the engine out to replace the engine harness. Mailed it off to Steve at B&B Custom Circuits who is going to be reproducing them. Just thought I would post some pictures of how it was routed and Steve can feel free to post pictures of his repopped harness. David http://s161.photobucket.com/user/coggonobrien/media/616%202/20160206_100856_zpsig8hf6xl.jpg.html" rel="nofollow">  http://s161.photobucket.com/user/coggonobrien/media/616%202/20160206_101202_zpsnkljio72.jpg.html" rel="nofollow">  http://s161.photobucket.com/user/coggonobrien/media/616%202/20160206_101311_zpszix7l61c.jpg.html" rel="nofollow">  http://s161.photobucket.com/user/coggonobrien/media/616%202/20160206_101801_zpsmpqvmiyw.jpg.html" rel="nofollow">
 |
Replies:
Posted By: Steve in NJ
Date Posted: 08 Feb 2016 at 12:28pm
|
You da' man Dave! In my kit, I'm using a longer bat handle toggle control switch. The reason for that is when I installed the electric lift on my 716H years back for the snow plow attachment, I found that a standard height toggle switch was a bear to work with gloves on. Sooo, I changed out the switch to a longer bat handle toggle. Man, what a difference that made when wearing gloves! I had more "feel" on the toggle, and I didn't mix it up with the other switches either. The long handle was the electric lift period. I doing the same thing with this harness kit. Using the same high amp long bat handled toggle for control. Should be much easier to use when its freezin' cold out and ya got gloves on! That's just one of the improvements. I have a few more idea's also I'm working on once Dave's harness gets here.. Steve ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: Dave in PA
Date Posted: 08 Feb 2016 at 4:04pm
| Steve, and here we thought that Jo-Jo did all the SNOW REMOVAL!!! LOL |
Posted By: Steve in NJ
Date Posted: 08 Feb 2016 at 10:45pm
|
Not this time she didn't Dave. LOL! She stayed in the house. She only went out when the dog had to do her thing, and then the snow drifts were a couple feet high. LOL! I didn't get home till midnight. Put in a 16 hr. day that day, and then had to work storm trouble that weekend. Sucked for me....
------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: Darrell, Jr. (MN)
Date Posted: 09 Feb 2016 at 7:11pm
|
Steve, I can tell you that I was off on the length of the harness. It turned out to be about 12" short on both ends. Other than that it worked the one time I used it. I will be interested in an updated harness when you get all the bugs out, just shoot me a email with the cost. |