Sherman tranny..again...
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11858
Printed Date: 30 Jan 2025 at 2:30am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Sherman tranny..again...
Posted By: Unstylish
Subject: Sherman tranny..again...
Date Posted: 03 May 2010 at 6:34am
Which position is direct ? Forward or rearward? I just bought a WC last night with a sherman, but its been so long since I had my puller out (with a step up) I dont remember anything about it. I am hoping it is a step down. I just cant remember which position is LOW (or HIGH) and which is diriect. If it isnt a low sider, Its for sale...BTW so is the tractor w/ a homemade 3 pt, and a HECK of a hydraulic setup that would run a logsplitter NO PROBLEMO!
-------------
The problem with reading MLPANKEYS posts, is that they dont make boots that tall.
|
Replies:
Posted By: David Maddux
Date Posted: 03 May 2010 at 6:46am
|
Direct is forward and on mine the overdrive is towards the back. Dave
|
Posted By: Dave H M
Date Posted: 03 May 2010 at 7:54am
|
Mine is the same as Dave's
|
Posted By: Pipe
Date Posted: 03 May 2010 at 9:34am
|
reduction in back and stright threw is forward
|
Posted By: Rfdeere
Date Posted: 03 May 2010 at 4:33pm
Just turn the input shaft, if the rear shaft turns the same speed your in direct.
-------------
Randy Freshour,Member Indiana AC Partners,
http://www.rumelyallis.com" rel="nofollow - http://www.rumelyallis.com
|
Posted By: Unstylish
Date Posted: 04 May 2010 at 6:37am
Thanks for the info guys..I bought it without knowing which it was, but unfortunately its a step up. Its for sale if anyone wants one, so is the tractor 1 269 921 4686, or would gladly work out a deal for a step down..
-------------
The problem with reading MLPANKEYS posts, is that they dont make boots that tall.
|
|