Scrap Items/Any wants???
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11832
Printed Date: 30 Jan 2025 at 2:34am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Scrap Items/Any wants???
Posted By: Chris/CT
Subject: Scrap Items/Any wants???
Date Posted: 02 May 2010 at 2:23pm
Here are some items going to scrap soon. I will be pulling good spindle assy,hubs. If you see anything you need speak up.
|
Replies:
Posted By: ChuckLuedtkeSEWI
Date Posted: 02 May 2010 at 2:42pm
| Your throwing a whole 4 bolt wide front away? Is there anything wrong with it? |
Posted By: Jacob (WI,ND)
Date Posted: 02 May 2010 at 3:12pm
My thoughts exactly ------------- Jacob Swanson 1920 6-12; 1925,1926 20-35 longfenders; 1925,1926 15-25's; 1927,1929 20-35 shortfenders; C; B's; IB; WC's; WD; WD45 |
ChuckLuedtkeSEWI wrote:Posted By: LouSWPA
Date Posted: 02 May 2010 at 3:16pm
|
Chris,
Even in so-so shape, that four bolt WFE is worth $400 or more, that's a little more than scrap
|
Posted By: Glockhead SWMI
Date Posted: 02 May 2010 at 3:24pm
| Hell, thats all good stuff around here! |
Posted By: rossinmich
Date Posted: 02 May 2010 at 3:37pm
| What is wrong with all that stuff that makes it scrap? It all looks like useable parts to me, something useable to someone. Offer it for sale as pieces instead of just scrapping it. Scrap prices are going down anyhow, at least where Im at in michigan. That wide front looks useable, I would take it if I was close to you. |
Posted By: Dave(inMA)
Date Posted: 02 May 2010 at 3:38pm
|
Chris, what does that 4-bolt front end fit? ------------- WC, CA, D14, WD45 |
Posted By: Chris/CT
Date Posted: 02 May 2010 at 4:29pm
| That WF is off a WD-45D. Here's the details. WF has slight bend in the main tube, must have been jumpin' rice levee's? otherwise it is good. I will pick the spindles/hubs/diesel bracket, etc to sell. WD-45G grill has holes in bottom, I may try and remove screen?, plow bottom's, In 5 years nobody has asked for old WD plow bottom's, why keep??,WD disc gan's are hammered, I could scavange some parts, but I'm tired of wasting [alot] of my time [ alittle time OK] picking parts off shot equiptment. CA WF cross tube?? WD-45 narrow front, save hubs, possibly spindle? I will alway's rather sell [ for small $$ ] before scrapping, but as Fred put it " my time is worth more than parts". There is also a WD-45G and WD-45D ske;ltons in background that will be dimantled and balance scrapped. |
Posted By: ToddSin NY
Date Posted: 02 May 2010 at 6:54pm
| Chris what do you want for the 4 bolt front end and can you make up a complete snap coupler disc from the parts you have?? And how are the points and land sides on the bottoms? Not sure if they'll fit my plow? |
Posted By: ChuckLuedtkeSEWI
Date Posted: 02 May 2010 at 7:36pm
| Chris, I will send you a PM |
Posted By: Dave(inMA)
Date Posted: 02 May 2010 at 7:47pm
|
Chris - I will be looking for some WD45 (gas) parts........don't yet know what, though. ------------- WC, CA, D14, WD45 |
Posted By: NCAllisnut
Date Posted: 02 May 2010 at 7:52pm
|
Chris, I need some spacers for my disc - let me look tomorrow evening and I'll let you know what I need.
Adam
|
Posted By: ac45
Date Posted: 03 May 2010 at 11:50am
| that front end will bring 400 on any consigment sale, and youd get close to that on ebay |
Posted By: Gerald J.
Date Posted: 03 May 2010 at 12:58pm
|
Plow bottoms seem to be in demand on this forum, if you can identify the bottom by a part number on some component. Gerald J. |