Farm Equipment - D 12 series 111 starter

Print Page | Close Window

D 12 series 111 starter

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11776
Printed Date: 28 Jan 2025 at 11:57pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D 12 series 111 starter

Posted By: logan d
Subject: D 12 series 111 starter
Date Posted: 01 May 2010 at 2:21pm

Still looking for starter for series 111 late model, would like to hear from someone who has rebuilt a starter the # is 1107265 delco. the 10 tooth drive gear dosent work on this tractor.

Replies:

Posted By: Dusty MI
Date Posted: 01 May 2010 at 3:01pm

I've got a D-10 series III. I've replaced the started bearings on it. Not that hard to do and made a big difference on how well it cranked over.

One bearing will drive through and the other run a tap, 5/8" NC if I remember right. Then turn a cap screw in and pull the bearing out.

Dusty

-------------
917 H, '48 G, '65 D-10 series III "Allis Express"

Posted By: Coke-in-MN
Date Posted: 01 May 2010 at 3:51pm

Starter drive should be a easy replacement, on HD4 starter I found rebuild shop that had them in stock. One pressed cage for clutch and other with heavy duty snap ring clutch.

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: Chris/CT
Date Posted: 01 May 2010 at 4:46pm

Call any Agco dealer that is qualified, they can get it for you.

Posted By: norm [ind]
Date Posted: 01 May 2010 at 7:07pm

replace the drive gear have them in stock 1-800-254-3116 sometimes a small amount of lube helps a lot