A long wait for a wheel weight
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=117732
Printed Date: 25 Nov 2024 at 10:53am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: A long wait for a wheel weight
Posted By: Arcs and Sparks
Subject: A long wait for a wheel weight
Date Posted: 18 Jan 2016 at 7:12pm
| I apologize if anyone feels that I've placed this post in the wrong forum. I am attempting to do a good quality restoration and I am looking to purchase 1 or 2 sets of D-21 rear wheel weights. They will not be going on a puller, just a trailer queen. To be honest I live in southern Ontario and these items were not very plentiful up here. I don't know what is dropping faster, the price of oil or the Canadian dollar but since I want to get all the pieces into a paint booth at roughly the same time I am hoping someone out there can help me. I don't know how I'll handle the mileage if they are half way across the country but possibly there is something closer to home that this post will identify. If you can help or even offer some suggestions on where to look I'd appreciate your feedback. I work a hectic schedule so if you send me a PM please allow me a day or two to reply. I'd like to purchase the weights before our dollar sinks so low that they start putting ATMs in submarines.:-) My neighbor pulls a 4320 JD and he tells me that if anyone knows where cast iron weights may be, its the tractor puller fraternity. I'm testing his advise. Thanks in advance and all suggestions are welcomed. |
Replies:
Posted By: TeamAllis
Date Posted: 18 Jan 2016 at 8:29pm
|
There are 2 brothers in Wisconsin that have some D-21 that are being parted out. There is a friend in Chatham-Kent On. that has several D-21, it worth a phone call to see if they can help. Leon Hardtke-414-774-6437 call in a.m. Dale Hardtke-262-719-3552 The friend in On. is Mark Bednarik Cell 519-355-8677 home 519-683-4645 Mark Gettinger in Indiana has several D-21 and lot of parts.-765-977-8348. Hope you have some luck. Jamie |
Posted By: lowell66dart
Date Posted: 19 Jan 2016 at 10:36am
|
If you have a Fastenall around you they will probably be the best way to ship if you find the weights. ------------- AC 6080 (8030,7060,200,175,D-17HC, 6040,160,6140 all gone) Farmall 1066 & 656 Hi-Clear (for sale), White 2-62 High Clearance, JD 4255 Hi Clear. |
Posted By: DSeries4
Date Posted: 19 Jan 2016 at 11:06am
They will not ship across the border though. Already checked out that avenue. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
lowell66dart wrote:Posted By: bsallis180
Date Posted: 19 Jan 2016 at 2:25pm
|
call sumerix imp. in lachine michigan phone 989-379-2721 http://www.sumeriximp.com/
|
Posted By: WF owner
Date Posted: 20 Jan 2016 at 3:20pm
| Where in Ontario are you? I am right across the St. Lawrence River from Cornwall. I would be glad to assist, if it helps. |
Posted By: Arcs and Sparks
Date Posted: 20 Jan 2016 at 4:01pm
|
Thanks for your offer. I am a quite a distance from you. I am in Petrolia, Ontario which is about 22 miles east of Port Huron, Michigan. The replies on the forum gave me quite a few leads that I'm tracking down. I am grateful for all of the help. I was close to you many times over the last few years. I drove my daughter to Ottawa for school which put me right over in your general area. I will keep your reply and if I source something close to you I'll drop you a note. Thanks again for your offer. It is appreciated. |