Farm Equipment - Dyno transition.

Print Page | Close Window

Dyno transition.

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11757
Printed Date: 27 Jan 2025 at 10:46am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Dyno transition.

Posted By: David Maddux
Subject: Dyno transition.
Date Posted: 30 Apr 2010 at 11:11pm

A few years ago I went in with 5 other local fellows to purchase a dyno. Did anyone ever make a conversion or apparatus to hook a belt pulley to a modern day dyno? i have several old tractors with belt pully that don't have a pto. Dave.

Replies:

Posted By: Fred in Pa
Date Posted: 01 May 2010 at 5:30am

YES

Posted By: Don(MO)
Date Posted: 01 May 2010 at 6:46am

Yes Dave M & W made a unit just for belt tractors. I used one years ago at the Johnne Deere store in Lee's Summit Mo. back in 1976. It was just a shaft with a pulley on one end and had two pillow block bearing and the other end it had a 540 PTO to the dyno,

The unit was setting on A frame that was staked down.

Don

-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.

Posted By: Rick of HopeIN
Date Posted: 01 May 2010 at 7:34am

I think some sawmills used a setup like that.

-------------
1951 B, 1937 WC, 1957 D14, -- Thanks and God Bless

Posted By: Lars(wi)
Date Posted: 01 May 2010 at 9:57am

would both pully's need to be the same size, right?

-------------
I tried to follow the science, but it was not there. I then followed the money, and that’s where I found the science.