Farm Equipment - D17 Location of timing slot

Print Page | Close Window

D17 Location of timing slot

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11743
Printed Date: 27 Jan 2025 at 11:17am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D17 Location of timing slot

Posted By: kerrdawg40
Subject: D17 Location of timing slot
Date Posted: 30 Apr 2010 at 4:54pm

There are 2 slots on top of bellhousing about 1 inch long and about an 1 inch apart from each other . Underneath is a hole in the very center. Is it one of these or am I missing something. D171590 is the serial # on the housing. Thx----Oh and how is the timings marked. Thx

Replies:

Posted By: mlpankey
Date Posted: 30 Apr 2010 at 5:09pm

its marked on the flywheel if its still there F here is the kicker . the F for tdc will be in the center of the hole on the bottom for serial numbers 17-19978 . 17-19978 and up the tdc F should appear at top of the timming hole . they set at 30degrees btdc factory prior ones set at 25 before tdc.

operators are standing by at two drunks garage to take orders for hei replacement distributors. well i am setting by to lazy to be standing. Man that motivational film has changed my life.

-------------
people if they don't already know it you can't tell them. quote yogi berra