WD for sale
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11741
Printed Date: 30 Jan 2025 at 11:53pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD for sale
Posted By: LouSWPA
Subject: WD for sale
Date Posted: 30 Apr 2010 at 4:34pm
     Late WD, has WD-45 transmission, shifter tower rebuilt, new temp Gage. three bolt wide front. Matched set of rear tires (50-60 %), the normal rot around valve stem. The three point hitch and tire chains do not go with it. It's a real strong runner, but does puff a little blue smoke when stating cold. I'd like to get $1500, but will entertain offers.
The hour meter and traction boost gages do not work. The hydraulics and PTO work fine. I will put a couple of pics here, if you are interested e-mail me, I'll send some more. It's killing me to let this go, but, times being what they are, yada, yada, yada
Also, I rebuilt the carb last year
|
Replies:
Posted By: BobHnwO
Date Posted: 30 Apr 2010 at 4:42pm
| Hour meter? |
Posted By: Mike(SEIN)
Date Posted: 30 Apr 2010 at 5:22pm
| Bob H. Look at the first pic. After market hour meter. |
Posted By: BobHnwO
Date Posted: 30 Apr 2010 at 5:24pm
| Pics.didn't show up 1st.time. |
Posted By: Steve in NJ
Date Posted: 30 Apr 2010 at 7:08pm
|
Damn Luigi! You got some iron sittin' around there. You better git' goin' on some of that stuff brother! LOL!! Steve@B&B |
Posted By: LouSWPA
Date Posted: 30 Apr 2010 at 7:17pm
that's why I'm parting with some stuff
|
Steve in NJ wrote:Posted By: LouSWPA
Date Posted: 30 Apr 2010 at 7:18pm
|
Posted By: ChuckLuedtkeSEWI
Date Posted: 30 Apr 2010 at 10:32pm
| I'm suprised. I would think with the wide front, good rubber all the way around and the condition of the tin, she would be gone already. Nice tractor Lou, wish I needed another project and we were closer. |
Posted By: Jacob (WI,ND)
Date Posted: 01 May 2010 at 10:51am
|
Might be a dumb question, but how SHOULD the hour meter operate? Is it just electronic based on if the tractor is on or not, or is it hooked up to the engine and measures RPM's or something? I guess I just don't know.... and am curious. ------------- Jacob Swanson 1920 6-12; 1925,1926 20-35 longfenders; 1925,1926 15-25's; 1927,1929 20-35 shortfenders; C; B's; IB; WC's; WD; WD45 |
Posted By: LouSWPA
Date Posted: 01 May 2010 at 11:09am
Not a dumb question at all. I don't know for sure, because it has never been connected since I bought it, but, I suspect that it is simply an electric clock movement that is energized from the ignition switch.
|
Posted By: Chris/CT
Date Posted: 01 May 2010 at 4:52pm
| I have that same hour meter, was wondering if there were any others around. |
Posted By: LouSWPA
Date Posted: 08 May 2010 at 10:14am
| OK, bumping this up, open for offers. I do have a better grille shell and fender that can go with it |
Posted By: realolman
Date Posted: 08 May 2010 at 10:55am
| where is this located? |
Posted By: LouSWPA
Date Posted: 08 May 2010 at 2:20pm
North west of Pittsburgh, Pa, intersection of state rt 18 and US 30
|
Posted By: mlpankey
Date Posted: 08 May 2010 at 2:28pm
|
Lou what do you want for the wc flat top. ------------- people if they don't already know it you can't tell them. quote yogi berra |
Posted By: LouSWPA
Date Posted: 08 May 2010 at 4:14pm
|
Posted By: Jason(OH)
Date Posted: 09 May 2010 at 1:41pm
|
I believe the hour meter works off of the engine oil pressure. My dad's WD45D had one just like it when he got it. There was a sending unit that was on a tee in the base of one of the oil filters. The sending unit had two screws for wires that ran to the hour meter. His hour meter works fine, unfortunately the sending unit does not work. |