tranny in 9650
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11740
Printed Date: 30 Jan 2025 at 2:23am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: tranny in 9650
Posted By: murphy
Subject: tranny in 9650
Date Posted: 30 Apr 2010 at 4:29pm
|
i have a 93 9650 will just stop moving code is E 32-39 shut tractor off wait a while and it will start moving again, any ideas, TIA.
|
Replies:
Posted By: Andrew(southernIL)
Date Posted: 01 May 2010 at 8:06am
I think its a sensor if I remember correct. My buddy has a 9655 and they had similar trouble before but that was over 10 years ago so i may not remember correct. Also about 2 or 3 years ago they were going down the road and the front end literally exploded; parts and drive shaft went everywhere and the dealer said that they had never seen or heard of such a thing happening. I know its not related to your problem just thought I would share.
-------------
If fishing is a sport your looking at an athlete
|
Posted By: jeffnil
Date Posted: 01 May 2010 at 9:07am
Posted By: cwhit
Date Posted: 01 May 2010 at 11:55am
|
On a 9645 three years ago it was one of the sensors in the clutch (inching) pedal.. So we just didn't touch the pedal while we used it . Then it rained and we got it repaired. Ran it like that for 2 days..
|
Posted By: Mojo
Date Posted: 01 May 2010 at 2:46pm
Andrew, did they say what cause the catastropic failure of the front end? Was it the axle or axle clutch that failed?
mojo/Mike
|
Posted By: murphy
Date Posted: 01 May 2010 at 8:56pm
|
code says its a short not parking brake
|
Posted By: Andrew(southernIL)
Date Posted: 04 May 2010 at 10:17pm
Sorry Mojo for not replying sooner but its been long enough ago that I can't remember the cause but I'll ask them next time I see them.
-------------
If fishing is a sport your looking at an athlete
|
Posted By: Mojo
Date Posted: 04 May 2010 at 11:20pm
I'd appreciate that Andrew, thanks.
mojo/Mike
|
|