Farm Equipment - need engine for 8070

Print Page | Close Window

need engine for 8070

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11662
Printed Date: 26 Jan 2025 at 10:28pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: need engine for 8070

Posted By: darrel in ND
Subject: need engine for 8070
Date Posted: 28 Apr 2010 at 2:42pm

I recently bought an 8070 FWA, thinking that the engine would be rebuildable, but like my usual luck, not the case. Block is shot, crank is shot, not much to work with. Any one have or know of something to get me going, either to rebuild, or good used to bolt right in. What combines used the same engine? I want to keep it as right as possible, not something way off factory. Thanks in advance. Darrel

Replies:

Posted By: Skyhighballoon(MO)
Date Posted: 28 Apr 2010 at 2:50pm

Some L2, L3's plus all the N5 & N6 used the 426. You probably going to need keep the front plates, etc. off your 8070 block if you go the combine engine into a tractor route. Those on here that know more will post better answers. Mike

-------------
1981 Gleaner F2 Corn Plus w 13' flex
1968 Gleaner EIII w 10' & 330
1969 180 gas
1965 D17 S-IV gas
1963 D17 S-III gas
1956 WD45 gas NF PS
1956 All-Crop 66 Big Bin
303 wire baler, 716H, 712H mowers

Posted By: tbran
Date Posted: 28 Apr 2010 at 7:50pm

this # 217-663-8540 is for a posted who has 3 n6 engines, should work