Pulling Forum - 180/190 ring gear brass rub block

Print Page | Close Window

180/190 ring gear brass rub block

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=116438
Printed Date: 25 Nov 2024 at 9:20am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 180/190 ring gear brass rub block

Posted By: bsallis180
Subject: 180/190 ring gear brass rub block
Date Posted: 21 Dec 2015 at 9:47am

looking for a estimated size for the brass block in the rear end, as in length and thickness

Thanks

Replies:

Posted By: 8070
Date Posted: 03 Jan 2016 at 9:44pm

What brass block u talking about .

Posted By: bsallis180
Date Posted: 03 Jan 2016 at 10:07pm

To insure the ring gear keeps in contact with the pinion you install a block between the back side of the carrier and the rear end housing to keep it from spreading apart under high horse power/ torque other wise the pinion will clean the ring gear teeth off

Posted By: 8070
Date Posted: 04 Jan 2016 at 11:55am

O OK never heard any one here doing that but we ant run but around 250 out of the ones here loljust farm class .sorry iI can't help have u talk to Larry wight he may know .

Posted By: bsallis180
Date Posted: 04 Jan 2016 at 1:11pm

It's something you won't really need to till you get to high hp mark but since i'm in there and it's staring me in the face I'm going to do it

Posted By: DrAllis
Date Posted: 04 Jan 2016 at 6:20pm

Been a while since I've looked at one but memory says 3 or more inches tall and an inch square. Whatever it takes to attach to the right sidewall and just clear the ring gear.