FS> B rear wheel weights
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=115927
Printed Date: 03 May 2024 at 1:12pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: FS> B rear wheel weights
Posted By: Ken in Texas
Subject: FS> B rear wheel weights
Date Posted: 09 Dec 2015 at 7:08am
|
I have several sets of 5 hole B and C wheel centers Part numbers 210105 and 210214 that can be used as B rear wheel weights. $50 a pair
|
Replies:
Posted By: PaulB
Date Posted: 09 Dec 2015 at 4:32pm
Ken: I hate to throw a kink in the works, but I've know many places where the Green guys have written the rules to only allow factory weights in the proper position. I tried to use WC centers on my RC for rear wheel weights and was not allowed to pull. After I goaded them about being afraid to be beaten I was allowed to pull NON COMP. Needles to say the RC showed up the others by quite a distance. That's why I stay away from "Stock class" pulls. TOO many wineys that get all worked up over a plastic trophy!!!!!
-------------
If it was fun to pull in LOW gear, I could have a John Deere.
If you can't make it GO... make it SHINY
|
Posted By: Ken in Texas
Date Posted: 13 Dec 2015 at 8:31am
PaulB wrote> Needless to say the RC showed up the others by quite a distance.
So let me see. After all is said and done, it's about bragin rights not about a plastic trophy.
We allow the non-conformists to pull in a weight class as long as there are no safety issues and they stay under the required maximum speed limit. Call it whatever. NON COMP or Exhibition.
Around here locally we all try our best to allow everyone who comes to hook up and pull the opportunity to do so. Cheaters too.
|
|