716 H
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=115895
Printed Date: 22 Nov 2024 at 3:08am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 716 H
Posted By: wrench spinner
Subject: 716 H
Date Posted: 08 Dec 2015 at 6:36pm
| Next week I plan on looking at a 716H, it has a bad engine, I have read on here about engine swaps on 720's. Do the tractors have the same chassis? What is the preferred swap? Any advice good or bad will be great. Thanks |
Replies:
Posted By: DSeries4
Date Posted: 08 Dec 2015 at 6:52pm
|
716s are a completely different animal from the 720. Can't help with the engine swap. That is all I can tell you. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: Steve in NJ
Date Posted: 09 Dec 2015 at 12:32pm
|
The 700 series Tractors (especially the 716H) is one tough machine. No doubt about it! The Allis 716H was normally powered by a Kohler 16HP engine. (K361) The Simplicity counterpart, was usually powered by a 16HP Briggs & Stratton. Any one lung Kohler or Briggs from either models of series Tractors will drop in and hook up pretty much without any trouble. You do have to watch with engines from other makes though especially in the driveshaft hookup area. A V twin Kohler Command engine will even shoehorn into a 700 series chassis with a little modification. I'm working on a project like that right now. Pretty darn tight, but it fits. The 16 horse version of the Kohler is a little tough to find now n' then, but you can always repower it with the 14HP version, or a Briggs from the same line.. HTH Steve@B&B ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: wrench spinner
Date Posted: 09 Dec 2015 at 6:38pm
| What would be the biggest hp engine and make that could be easily shoehorned into the tractor? |
Posted By: TL12A
Date Posted: 10 Dec 2015 at 8:52am
| Possibly a Kohler Command 20 HP--hth |
Posted By: Steve in NJ
Date Posted: 04 Jan 2016 at 10:38pm
TL12A is correct! A Kohler Command! Mine is 18HP Here's my 716H I'm playing with. My wife can't wait to road test it. I might have trouble with the hood. Ahh, who needs a hood! LOL!
------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: wrench spinner
Date Posted: 10 Jan 2016 at 5:06pm
| Things didn't work out for me to go look at the 716H. Timing for me and the seller didn't line up.maybe in the spring. |