D17 Series 1 Final drive and bearings
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=115856
Printed Date: 08 Sep 2025 at 9:31am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D17 Series 1 Final drive and bearings
Posted By: ACthunder
Subject: D17 Series 1 Final drive and bearings
Date Posted: 07 Dec 2015 at 9:33pm
|
This is a tractor I just purchase and going through it for the first time. I just took the pan off the left side final drive and cleaned it, put a new rubber/cork gasket on it and put new fluid in. (had about 3 or 4 cups worth when I took it down. Is this a good time to check anything else in this area while I have the tire off and jacked up like the rear bearings or anything? I took the small plate off with 4 bolts and saw that rear bearing but I guess I can't do much from there.. it looks like to really access them you have to take the 8 bolts off that hold the final drive unit on.... These bearings get lubed by the final drive fluid I just put in? Thanks, 
|
Replies:
Posted By: MACK
Date Posted: 07 Dec 2015 at 9:42pm
| If the stub axle don't have any in play, put it togather and forget it. It has ran 55 plus years and should run another 55. MACK |