Farm Equipment - D-19 trans

Print Page | Close Window

D-19 trans

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11552
Printed Date: 26 Jan 2025 at 12:24am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D-19 trans

Posted By: ssmiller
Subject: D-19 trans
Date Posted: 26 Apr 2010 at 9:22am

I've got a D-19 that won't stay in 4th & 8th gear unless physically held there,does'nt grind,clash or make any noise but won't stay put. Any easy fix for this ?

Replies:

Posted By: C.W.Adair Co.Ia
Date Posted: 26 Apr 2010 at 11:52am

The only fix I know is to replace the affected gears. C.W.

Posted By: skipwelte
Date Posted: 26 Apr 2010 at 12:34pm

there is a lot to this problem, could be the engagement dogs are badly worn, could be the gears move back and forth to much on the main shaft, could be the countershaft is loose, could be the shift detents are worn in the shifter. Its probably a combination of problems, usually the dogs are worn and the collar isnt moveing into the gear far enough to hold. There is no easy answer. HTH