Farm Equipment - D-14 pops out of 2nd gear

Print Page | Close Window

D-14 pops out of 2nd gear

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11543
Printed Date: 26 Jan 2025 at 12:24am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D-14 pops out of 2nd gear

Posted By: rjranch
Subject: D-14 pops out of 2nd gear
Date Posted: 26 Apr 2010 at 7:24am

I replaced the clutch and throughour bearing on my D14 and now it is starting to come out of 2nd gear wheni put it under a load. It also seems harder to find the other gears, the day before i could get it in 2nd and 3rd without a problem, but no way on the others? now it goes in all gears but have the problem on 2nd gear. Any advice? What is the fix and how difficult is the repair.

Thanks Guys

Replies:

Posted By: Austin(WI)
Date Posted: 26 Apr 2010 at 7:45am

Sounds like it might be time to split it open and take a look inside at what is going on.

-------------
"Better By Design"

Posted By: Adam Stratton
Date Posted: 26 Apr 2010 at 11:52am

Take the side cover off and look at the shift fork. It probably has the edge worn off the side that engages it into position. If you try to bend the fork, it will probably start coming out of 3rd instead. I have one in similar shape and have been planning on trying to weld a bead on the side of the fork, then smooth it down and see what happens. Good luck!

Posted By: skipwelte
Date Posted: 26 Apr 2010 at 12:49pm

Ive moved the detents on the shift fork shaft closer to the gear so it will go into gear farther to help it stay in gear. Takes a lot of trial and error to get it close. If the engagement dogs are worn to badly that wont work. Sometimes splitting the tractor and using a thicker snap ring to take out the gear end play helps too.