Farm Equipment - Hydraulic PTO in 180 not working

Print Page | Close Window

Hydraulic PTO in 180 not working

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=115081
Printed Date: 27 Sep 2024 at 6:34am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Hydraulic PTO in 180 not working

Posted By: zachhart(IN)
Subject: Hydraulic PTO in 180 not working
Date Posted: 22 Nov 2015 at 4:05pm

All the lines are hooked up does not work. With the engine running and the pto in the engaged position you can free spin the pto. Any ideas on what to look for? Also the tractor slips on the low side any idea what that will cost to fix? Thanks in advance

Replies:

Posted By: DrAllis
Date Posted: 22 Nov 2015 at 5:33pm

Look behind the battery box down low where the clutch pedal pivot shaft is located. You'll find a short lever for the PTO disconnect. Rotate this lever counterclockwise while someone gently turns the PTO shaft at the back. Rotate until it clicks into full engagement.