Adapters for 3 point lift arms
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11498
Printed Date: 26 Jan 2025 at 10:11pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Adapters for 3 point lift arms
Posted By: Lance/SC
Subject: Adapters for 3 point lift arms
Date Posted: 25 Apr 2010 at 11:53am
| Looking for two adapters that mount to the top of lift arms in order to hook to lift latches without having to straight bolt them to the rock shaft arm. (hope this makes sense) It's for a CA. Thanks |
Replies:
Posted By: NCAllisnut
Date Posted: 25 Apr 2010 at 12:16pm
|
Like the ends on plow lift arms that you could adapt to your lift links?
Adam
|
Posted By: Chris/CT
Date Posted: 25 Apr 2010 at 1:14pm
| Do you have the proper CA Lift latches? if so, there is no adapter to mount the lift latch, it pins to lift arms. If you do not have lift latches I'm not sure what else was available to pint o those. |
Posted By: Jim-Ohio
Date Posted: 25 Apr 2010 at 1:36pm
| Do you have a snap coupler CA or are you converting a pin-hitch CA? If you have a pin-hitch CA then to install snap-coupler lift latches you will either have to cut off the ends of the rock shafts or replace the rock shaft with one from a snap-coupler CA. The lift latches then just bolt to the rock shaft. |
Posted By: NCAllisnut
Date Posted: 25 Apr 2010 at 3:24pm
|
I think he is trying to make the lifting links for a 3 point adapter that would attach to the lift latches. Maybe I'm worng, but that's how I read it.
Adam
|
Posted By: Lance/SC
Date Posted: 25 Apr 2010 at 4:43pm
| The name I couldn't think of was the lifting links on the 3 point adapter. These bolt to the lift links and the other end has the SC pins that go in my SC lift latches. I have the correct rock shaft and latches. I saw this set up on a CA at the GOTO yesterday. Thanks Adam. |
Posted By: NCAllisnut
Date Posted: 25 Apr 2010 at 8:02pm
|
Are you looking for the factory 3 point adapter vertical pieces, or are you trying to make your own?
Adam
|
Posted By: Rfdeere
Date Posted: 26 Apr 2010 at 1:52am
|
I think he is talking about the top pieces shown here: http://secure79.elinuxservers.com/%7Etractor/catalog/product_info.php/cPath/24_25/products_id/54?osCsid=c5b759c51243d697428c74be2f06e477 - http://secure79.elinuxservers.com/~tractor/catalog/product_info.php/cPath/24_25/products_id/54?osCsid=c5b759c51243d697428c74be2f06e477 ------------- Randy Freshour,Member Indiana AC Partners, http://www.rumelyallis.com" rel="nofollow - http://www.rumelyallis.com |
Posted By: Don(MO)
Date Posted: 26 Apr 2010 at 4:50am
I have a used pair of them I'd sale for $60.00 + the trip.
Don ------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |
Rfdeere wrote:Posted By: Lance/SC
Date Posted: 26 Apr 2010 at 7:05am
| Thanks, RFDeere, thats exactly what I need. I will be calling Jim about something else today and will touch base with him about these. |
Posted By: Don(MO)
Date Posted: 27 Apr 2010 at 7:42pm
|
Lance I sent you a PM.
Thanks, Don ------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |