Farm Equipment - 3 point adapter

Print Page | Close Window

3 point adapter

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11479
Printed Date: 24 Jan 2025 at 5:15pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 3 point adapter

Posted By: John Ontario
Subject: 3 point adapter
Date Posted: 24 Apr 2010 at 7:43pm

Picked up a snap coupler to 3 point adapter today, the type that slips into the bell. There is brackets on the lift arms for what I guess is for a stabilizer. Does anyone have one available or is it just as easy to make one.

Thanks

John

Replies:

Posted By: Chris/CT
Date Posted: 24 Apr 2010 at 10:24pm

There was a couple different arrangements for the stabilizer. For plows/harrows they show "anchor" with chains to bar assemblies [lift arms], and beaming screw to "cross tube", on rakes/mowers, they show "stabilizer" from lift arms to mounts under rear housing. What I did because most of these stabilizer's/anchors were left "hanging in the barn" somewhere, NOT with the adapter, was find a big heavy duty turnbuckle [ like the ones used on roadside cable guard rails] and throw that on in between arms.

Posted By: Chris/CT
Date Posted: 24 Apr 2010 at 10:25pm

I may be able to dig up a "re-print" showing these adaptations if you would like one sent to you.