Farm Equipment - Allis 200 power director

Print Page | Close Window

Allis 200 power director

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=114147
Printed Date: 27 Sep 2024 at 4:37pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis 200 power director

Posted By: Romaninmi
Subject: Allis 200 power director
Date Posted: 02 Nov 2015 at 7:22pm

I went and looked at a allis 200 today it has only been used about 20 hrs in the last 3 or 4 yrs sits outside runs like a top trans does not jump out of 3 rd gear but the power director lever will not go into low range my question is this just from sitting around or is is something internal the current owner has very little tractor knowledge only used it for scraping snow and pulling out stuck trucks in his driveway any help on this would be great

Replies:

Posted By: critter
Date Posted: 02 Nov 2015 at 8:37pm

I will bet it is stuck from setting outside.

Posted By: MACK
Date Posted: 02 Nov 2015 at 9:31pm

Do you mean the lever won't move into low posion or won't do any thing in low? MACK

Posted By: Romaninmi
Date Posted: 02 Nov 2015 at 9:48pm

It will not move to the low position or n position

Posted By: MACK
Date Posted: 03 Nov 2015 at 6:33am

I guess you are pushing down on lever before trying to move it. MACK

Posted By: Romaninmi
Date Posted: 03 Nov 2015 at 10:58am

it has the gated lever

Posted By: Lynn Marshall
Date Posted: 03 Nov 2015 at 12:13pm

Disconnect it at the valve body to see if it's the linkage or the actual valve spool itself.