WD45 CAM
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=113922
Printed Date: 25 Nov 2024 at 8:47am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD45 CAM
Posted By: AC puller
Subject: WD45 CAM
Date Posted: 29 Oct 2015 at 7:32am
CAN SOMEONE GIVE ME ADVISE ON WHERE TO GET A CAM NEW OR GROUND FOR PULLING.AND WHOS ARE BETTER?
|
Replies:
Posted By: worldchamp19
Date Posted: 30 Oct 2015 at 3:00pm
Posted By: AC puller
Date Posted: 31 Oct 2015 at 11:57pm
Posted By: wi50
Date Posted: 01 Nov 2015 at 12:59pm
I can give you some specs if I know what the engine specs are. As far as a grinder, there's several pretty good ones, all will have slightly different master lobes to work with and slightly different opinions. Getting a cam that isn't to big and getting it timed correctly to the crankshaft will be more important than anything else
-------------
"see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet"
|
Posted By: wi50
Date Posted: 01 Nov 2015 at 1:02pm
I've got a couple on the shelf for smaller engines and lower end rpm range, depending on what you'll need one may be a good match. I just send several at a time to the grinder to make it easy.
-------------
"see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet"
|
Posted By: mike a
Date Posted: 01 Nov 2015 at 7:08pm
|
berry cam in lester prairie,mn ground me a 175 profile cam a few years back,not sure if they still do
|
Posted By: Charlie175
Date Posted: 04 Nov 2015 at 5:55am
Which CAM profile would a "Z" code motor follow? 170?
-------------
Charlie
'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD
|
Posted By: BennyLumpkin
Date Posted: 04 Nov 2015 at 11:13am
Yup a Z code is a 170 engine
-------------
Central PA Allis Express
1934 WC254
1945 WF
1945 WC135755
1951 WD68085
1953 WD45-150217
1957 WD45D-230744D
B110
|
Posted By: mgburchard
Date Posted: 05 Nov 2015 at 3:17pm
|
The secret to the best pulling cam for a siameeze intake port is one that's ground that makes the engine 2 two cylinders opposing each other .
|
|