Going to sell some AC stuff
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11388
Printed Date: 26 Jan 2025 at 10:32pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Going to sell some AC stuff
Posted By: Michael Crowe
Subject: Going to sell some AC stuff
Date Posted: 22 Apr 2010 at 1:47pm
I am going to thin the herd so to speak. What has been fun is slowly not so fun because there are too many projects with not many getting done. I have mainly concentrated on WD/WD45 tractors/implements/accessories, so if you are looking for something along that line and don't see it listed, let me know, I may have it and be willing to sell it.
1953 WD45, factory 3 bolt wfe, factory power steering, runs good, good tires/wheels, transport valve; 1953 WD, narrow front, runs good, good tires/wheels (has a Woods L306 mower on it with rebuilt spindals, but I will sell it with or without the mower; D15 Diesel, Series 1, 3 point is complete but for toplink and drawbar, has new 18.4x24 with combine wheels (I have a set of spin out rims and factory pie weights for this tractor if the buyer wants them as well); AC Snap Coupler Rear Blade; AC Snap Coupler Toolbar; AC springtine chisel for WD; AC 172 bush hog mower, all clutches work; AC 3-14 plow on rubber; No. 4 subsoiler with mole; complete set of ARPS half tracks; Drawbar Hitch Subsoiler; Complete Snap Coupler Setup for a B Allis; No. 63 Slat Plow with remote cylinder; No. 7 rake/tedder with optional dual wheels front and back; Snap Coupler 2 row corn planter; Snap Coupler Disc Tiller 6 blade fully mounted; No. 64 slat plow; No. 212 Disc with T Bar hitch; 2 Sets of 3 stack weights; No. 63 slat plow with gauge wheel; semi mounted 4 disc plow; wide fronts; single fronts; tricycle adapters; remote cylinders; call me at 816 898 7277.
-------------
The 14th Annual Exclusive AC Swap Meet will be held in Boonville, MO, March 7-8, 2025. See the club website for details: http://www.moacclub.com/
|
Replies:
Posted By: Dave (NE)
Date Posted: 22 Apr 2010 at 2:48pm
|
Do you have an AC snap coupler spring tooth? Thanks, Dave
|
Posted By: HD6GTOM
Date Posted: 22 Apr 2010 at 5:53pm
|
Dave I have what I think is a snap coupler spring tooth. Sorta looks like a field cultivator. Located in south central Iowa, I think it is complete,sits out under a pile of steel posts. I have not measured it, it must be 10 or 12 feet wide I think it has 2 gague wheels on it. Would like 150.00 for it.
|
Posted By: morton(pa)
Date Posted: 22 Apr 2010 at 7:33pm
|
Mike, Tried sending you a PM. Your Inbox is full. After you delete a few can you please send me a PM? I have a question for ya. Thanks.
|
Posted By: E Clark
Date Posted: 22 Apr 2010 at 7:58pm
|
Mike,what do you want for the snap coupler blade
|
Posted By: Michael Crowe
Date Posted: 24 Apr 2010 at 10:50am
Just decided to add a grain drill and early lever toolbar blade to the list. I will take some pictures today, so if there is anything you are interested in, email, call at 816 898 7277 or pm me and I will get back to you. Michael
-------------
The 14th Annual Exclusive AC Swap Meet will be held in Boonville, MO, March 7-8, 2025. See the club website for details: http://www.moacclub.com/
|
Posted By: Michael Crowe
Date Posted: 24 Apr 2010 at 11:01am
|
I meant to add, the grain drill is fully mounted, in excellent shape, grass seeder AND all the gear, spacers, brackets, drive chain, etc. to hook it up to a WD/WD45. The toolbar blade is very unusual. If you look in the Oxnard book, it shows the toolbar blades toward the back of the book. This is the early version that has levers to angle th eblade from side to side. I have never seen one like it. I also have a set of NOS early style box ends for that blade.
-------------
The 14th Annual Exclusive AC Swap Meet will be held in Boonville, MO, March 7-8, 2025. See the club website for details: http://www.moacclub.com/
|
Posted By: Dave (NE)
Date Posted: 24 Apr 2010 at 11:17am
|
Michael, could you email some pictures to mailto:dw31227@windstream.net - dw31227@windstream.net of the grain drill. What are you asking for it? Thanks, Dave
|
Posted By: RAD
Date Posted: 25 Apr 2010 at 8:59pm
|
im looking for a set of halftracks - please give me a bit of detail about condition and price. i had a set a number of years ago that my son adopted and doesnt seem interested in returning to me. thanks .
|
Posted By: Michael Crowe
Date Posted: 27 Apr 2010 at 2:18pm
|
guys, I am goin going to start listing this stuff on ebay. Thus far, the following is sold:
WD45lpg dual fuel carb/regulator
D15 pie weights
D15 wheel centers/rims
1 Set of stack weights/brackets
4 blade disc plow
I have a bunch of WD/WD45 stuff if you are interested let me know. Michael
-------------
The 14th Annual Exclusive AC Swap Meet will be held in Boonville, MO, March 7-8, 2025. See the club website for details: http://www.moacclub.com/
|
Posted By: Don(MO)
Date Posted: 27 Apr 2010 at 3:38pm
|
Hi Michael,
I need to get over to your farm and look at all the WD/WD45 stuff before it's all gone, I'll call you tonight and set up a time to come look.
Don
-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.
|
Posted By: boergoatfarmer
Date Posted: 27 Apr 2010 at 9:12pm
hey mike would you email me prices. Prices for this stuff since I am coming out in may might as well see if can fill the trailer fuller thanks also some pics of what ever you have wildhoofacres@hotmail
-------------
Raising tunis sheep and oberhasli dairy goats and driving my allis chalmers tractors... Life is great
|
|