Farm Equipment - D17D Piston and rings

Print Page | Close Window

D17D Piston and rings

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11376
Printed Date: 24 Jan 2025 at 8:31am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D17D Piston and rings

Posted By: GregLawlerMinn
Subject: D17D Piston and rings
Date Posted: 22 Apr 2010 at 12:20am

My D17D got a valve stuck open and it was hitting the piston. Should have space open in the shop this weekend and will roll it in and pull the head and take it to the engine shop for rebuilding. I am expecting to see the piston damaged/cracked as a result of the stuck valve and am wondering if one can purchase a single piston/ring/wrist pin set?

-------------
What this country needs is more unemployed politicians-and lawyers.
Currently have: 1 D14 and a D15S2.
With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC

Replies:

Posted By: Matt MN
Date Posted: 22 Apr 2010 at 7:17am

Yes, you can. I just puchased one sleeve and piston assembly this past winter. I think it was around $110

-------------
Unless your are the lead horse the scenery never changes!!

Posted By: GregLawlerMinn
Date Posted: 22 Apr 2010 at 8:53pm

I guess I should have asked for a source on where to purchase a Piston/ring/wrist pin assembly. Any suggestions?

Thanks

-------------
What this country needs is more unemployed politicians-and lawyers.
Currently have: 1 D14 and a D15S2.
With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC

Posted By: Matt MN
Date Posted: 22 Apr 2010 at 9:25pm

I believe it was "Daves Ag service" in Humbolt IA Not positive though.

-------------
Unless your are the lead horse the scenery never changes!!

Posted By: Brian Jasper co. Ia
Date Posted: 22 Apr 2010 at 9:33pm

I got a set of sleeves and pistons from Sandy Lake. $145 per hole for USA made aftermarket. A little over $200 per hole for AGCO parts.

-------------
"Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford