Print Page | Close Window

Engine builders... Printed From: Unofficial Allis Category: Other Topics Forum Name: Pulling Forum Forum Description: Forum dedicated to Tractor and Garden Pulling URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=113413 Printed Date: 25 Nov 2024 at 7:43am Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com Topic: Engine builders... Posted By: OrangeFever Subject: Engine builders... Date Posted: 16 Oct 2015 at 7:50pm Im starting to gather my pieces for a wd45. I using farmall c rods and will offset grind my crank. With my rough calculations I'm looking at being .201" below my deck using a 2.6" compression height piston. Thats too high of compression for me so I'm looking for or want to find a 4.155" sbc piston with a compression height that will get me around 12.5:1 or 13:1. Do you have any piston ideas what will work or I can bush with my rods? Thanks!

Print Page | Close Window Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net