Farm Equipment - D-19 Final Drives

Print Page | Close Window

D-19 Final Drives

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11317
Printed Date: 24 Jan 2025 at 3:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D-19 Final Drives

Posted By: KY
Subject: D-19 Final Drives
Date Posted: 20 Apr 2010 at 3:19pm

How do you check the oil level in the final drives? The fill is under the seat.

Replies:

Posted By: Austin(WI)
Date Posted: 20 Apr 2010 at 3:30pm

There should be drains at the bottom..you might have to drain the oil out to see what you have...level wise and see the condition of the oil then dump it back in.

-------------
"Better By Design"

Posted By: Austin(WI)
Date Posted: 20 Apr 2010 at 3:34pm

Unless there are secondary plugs at the top of the casing that alows you to see if oil comes out/ put you finger in it.

-------------
"Better By Design"

Posted By: skipwelte
Date Posted: 20 Apr 2010 at 4:20pm

Yup, there are drain plugs at the bottom outside of the final drive casting, there are also level plugs about half way up the casting on the rear outside of each one. They might be low, they might be high, if the pinion shaft seals leak they could be overfull. There are two large plugs on the top of the rear housing, they are the fill plugs and also the breather for the final drives. HTH