Farm Equipment - Allis G hydraulic cylinder

Print Page | Close Window

Allis G hydraulic cylinder

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11259
Printed Date: 24 Jan 2025 at 3:49am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis G hydraulic cylinder

Posted By: Morris Hill NC
Subject: Allis G hydraulic cylinder
Date Posted: 19 Apr 2010 at 12:12pm

I just finished my G , and hydraulic cylinder leak front
and back. Do they make kits for these or how are they repaired?
Any help appreciated. Thanks
Morris

Replies:

Posted By: CTuckerNWIL
Date Posted: 19 Apr 2010 at 1:49pm

If it is similar to the B,C cylinders you can buy the new packings for it. It may just need tightened up a bit. If the rod is pitted bad or has any deep scratches it will have to be replaced to fix it. I've made new rods for B,C cylinders and for the Allis remote cylinders and replaced the packings and guide bushing. Here are some things to know about repairing one of these cylinders. http://www.garlock.com/product_techdata/Hyd_install.pdf - http://www.garlock.com/product_techdata/Hyd_install.pdf

Charlie

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: Morris Hill NC
Date Posted: 20 Apr 2010 at 7:34pm

Charlie

Thanks for the info ,will try to fix next week.
Morris