Replacing hand clutch
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=112462
Printed Date: 07 May 2024 at 3:39am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Replacing hand clutch
Posted By: worldchamp19
Subject: Replacing hand clutch
Date Posted: 24 Sep 2015 at 8:53pm
|
What is involved in replacing the hand clutch with section of a WD45 with the gear box from a WC? Thanks |
Replies:
Posted By: CAL(KS)
Date Posted: 25 Sep 2015 at 2:46pm
|
are you talking about just removing the hand clutch to prevent slippage? you can bolt the clutch together by using 2 of the pto drive gears, or you can use a splined coupler from a wc trans to pinion shaft. several different ways to accomplish this. think you could probably bolt the clutch together if you weren't wanting to also lose weight I don't think you mean put in a gear box in place of the clutch?   ------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: worldchamp19
Date Posted: 26 Sep 2015 at 6:58am
| Yes I was meaning taking out the housing. I saw a picture where they took out the hand clutch housing moved the wd gear box housing to rear axle and in front put a wc gear box and it was connected to the engine. |
Posted By: CAL(KS)
Date Posted: 26 Sep 2015 at 9:09am
|
wd/45 gearbox is one casting with the rear end. you would have to remove the torque housing ( hyd pump and clutch section) and replace with wc bellhousing and transmission, and couple it to the wd/45 input shaft then figure a way to seal the oil in. a bunch of work to cobble something together that wouldnt be legal to pull anywhere. in my opinion, not worth the time and effort
------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: mattb
Date Posted: 28 Sep 2015 at 9:50am
| its legal everywhere I pull you can call me if you have questions six one eight three one four two seven four one |
Posted By: DrAllis
Date Posted: 28 Sep 2015 at 10:31am
| Your $$$ much better spent making the engine stronger. |