910 6 speed drive belt replacement
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=112388
Printed Date: 26 Nov 2024 at 4:20pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 910 6 speed drive belt replacement
Posted By: Jman
Subject: 910 6 speed drive belt replacement
Date Posted: 23 Sep 2015 at 4:45pm
|
Hello, I hope someone can help me. My low range drive belt broke and this is my first time replacing. While doing so Im also going to do the high belt too. It appears it's everything is out of adjustment and this is why the belt broke. When you change from high to low the idler pulley is hitting the side of the low range belt. My owners manual for the 900 series explains how to do this on page 24 but that page is of course missing. Does anyone have this page or can post some pictures. Thanks so much. Jerome |
Replies:
Posted By: talntedmrgreen
Date Posted: 24 Sep 2015 at 6:39am
This is from the Deutz Allis 900 series service manual....much more in depth, and even better than the Simplicity manuals. I can email it in it's entirety, if you wish.    ------------- Patterson B1*B1/B1Forklift*B10*BigTen/B1Loader*B110*B208*B206*616*Homelite T16H/T8/T7/RM7E*Landlord/Loader/Trencher*Broadmoor717*Serf525*2110*7790*Legacy XL*Twin 20*Squire9*Squire6*JCPenny 494 |
Posted By: Jman
Date Posted: 24 Sep 2015 at 10:55am
|
Mr. Green, You are the best!! Yes Sir I would love to have it. My email address is jcovington@connorfloor.com Thanks so much, Jerome |
Posted By: Jman
Date Posted: 24 Sep 2015 at 11:07am
|
Mr. Green, Just reviewed the above information and it is EXACTLY what I was looking for. You just saved me a lot of trial and error... thank you Sir |
Posted By: Skeeter
Date Posted: 28 Sep 2015 at 9:02pm
| Very good info here. I have a allis 716 with the 6 speed. Would this pulley setup be the same. If so could you email it to me also. thesilverado2001@yahoo.com. Also I am looking for some parts for the 6 speed like the rear pulley (keyway is well worn) and the brake pads for the pulley. The pad is missing and i sometimes have to wait for the pulley to stop moving to put it into gear. Any info would be very helpful. |
Posted By: Jman
Date Posted: 29 Sep 2015 at 6:40am
| I plan on trying to make it out of a worn out car bake pad |
Posted By: talntedmrgreen
Date Posted: 29 Sep 2015 at 7:14am
|
Manuals sent....sorry for the delay! ------------- Patterson B1*B1/B1Forklift*B10*BigTen/B1Loader*B110*B208*B206*616*Homelite T16H/T8/T7/RM7E*Landlord/Loader/Trencher*Broadmoor717*Serf525*2110*7790*Legacy XL*Twin 20*Squire9*Squire6*JCPenny 494 |
Posted By: Jman
Date Posted: 29 Sep 2015 at 8:09am
| Thank you Sir!!!! |