Pulling Forum - WD spark plugs

Print Page | Close Window

WD spark plugs

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=112129
Printed Date: 25 Nov 2024 at 7:37am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD spark plugs

Posted By: Carl(NWWI)
Subject: WD spark plugs
Date Posted: 18 Sep 2015 at 9:45am

Haven't really put much thought into spark plugs on my WD. Have an E3 engine with long reach plugs. Running 1/8 over flat tops, 6 cylinder carb, Barney cam, and electronic ignition. Currently running E3.18's but I am do for a new pair. What would be recommended for this? Sitting around 210-220psi compression.

Thanks Carl

Replies:

Posted By: Charlie175
Date Posted: 18 Sep 2015 at 9:55am

I have Autolite 65's in mine. Not sure if they are the best....Was going to try some of the 65x but they were out of stock

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD

Posted By: DrAllis
Date Posted: 18 Sep 2015 at 12:07pm

AC Delco 44XL or XLS

Posted By: Carl(NWWI)
Date Posted: 18 Sep 2015 at 5:29pm

Just picked up a set of 44xl's, we'll give em a go.

Thank you

Posted By: Beirnesy
Date Posted: 20 Sep 2015 at 7:24pm

Carl, are you still pulling that XT that you where running a couple years ago ?

-------------
1969 220,1967 190DXT,1968 190DXT, LGT's 710,,716

Posted By: Carl(NWWI)
Date Posted: 21 Sep 2015 at 8:30pm

Nope, pulled her apart couple winters ago with big intentions and there it sits, going back to stock with it, well, close to stock, might throw an hx35, and 7080 tips in it just for playing with around home, but we bought a Massey Ferguson 2745 with the Perkins V8 in it, that is the next puller.