Farm Equipment - Thought on Parts to save/Scraping

Print Page | Close Window

Thought on Parts to save/Scraping

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11193
Printed Date: 24 Jan 2025 at 3:53am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Thought on Parts to save/Scraping

Posted By: Chris/CT
Subject: Thought on Parts to save/Scraping
Date Posted: 18 Apr 2010 at 9:39am

I'm into cleaning up, have multiple projects in process, soaking to free-up, etc. Question's/advise on "what to save" WD-45 NF, save hubs, anything else? WD-45D+G skeletons, pulling gear sets,R+Pinions/carriers,hand clutch[s],shafts,shifters,covers, etc. Am I missing anything? Final drives are dime a dozen, castings/housings no call for these all the years on Forum, If anything comes to mind, please post, I will save before scrap.C/CT

Replies:

Posted By: BennyLumpkin
Date Posted: 18 Apr 2010 at 9:41am

Have a correct shift assembly for a WD-45? Mine has one on it for a WD

Posted By: Chris/CT
Date Posted: 18 Apr 2010 at 9:44am

Yes, I do. I need one, other is available, will start looking them over, will be keeping the best one [ of course].

Posted By: CTuckerNWIL
Date Posted: 18 Apr 2010 at 12:12pm

Every once in a while somebody is looking for a tractor with a serial number next to 1 they have. It might not hurt to post the numbers of the ones you are going to scrap.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: ToddSin NY
Date Posted: 18 Apr 2010 at 2:49pm

45 draw bar, just the rear part is fine where the wagon pin goes into? Dad is looking for one. I also need muffler and the half moon part that the throttle and hyd lever run on.

Posted By: BennyLumpkin
Date Posted: 19 Apr 2010 at 9:11pm

PM me a price on that shift assembly...whats wrong with the one that isnt the better one?