Farm Equipment - Replacement belts for Roto Baler

Print Page | Close Window

Replacement belts for Roto Baler

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11177
Printed Date: 26 Jan 2025 at 10:03pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Replacement belts for Roto Baler

Posted By: GaryinSEKan
Subject: Replacement belts for Roto Baler
Date Posted: 17 Apr 2010 at 9:27pm

Does anyone know who might sell the black rubber belts for a Roto Baler?

Replies:

Posted By: Dave(inMA)
Date Posted: 17 Apr 2010 at 9:34pm

Try here: http://www.excelbelting.com/ecommerce/control/keywordsearch - http://www.excelbelting.com/ecommerce/control/keywordsearch

Put "roto-baler" in the search box and you should see bottom and top belts listed in the results.

-------------
WC, CA, D14, WD45

Posted By: Chris (swIA)
Date Posted: 17 Apr 2010 at 9:35pm

I get mine from the local Farm and Home but most of the farm stores don't handle them. I try to keep them buying them locally because they still carry rotobaler twine. Tom Yaz has them on his site along all of the springs that you probably need also.

Posted By: Dave(inMA)
Date Posted: 17 Apr 2010 at 9:42pm

Chris, I didn't realize that Tom carries them. Will keep that in mind next time I am buying some....much rather buy from someone on this site!

-------------
WC, CA, D14, WD45

Posted By: Ray
Date Posted: 18 Apr 2010 at 10:16pm

I have several sets of the upper belts (black endless) not sure if I have a complete set of bottom ones. 785-353-2392

Posted By: GaryinSEKan
Date Posted: 28 Apr 2010 at 8:22pm

Got the upper and lower belts I ordered from Tom today. Before I start putting them on does anyone have any pearls of wisdom to make it smoother? They're the splined type.

Posted By: Austin(WI)
Date Posted: 28 Apr 2010 at 10:47pm

Shoupe Ag Parts

-------------
"Better By Design"

Posted By: mikey(ny)
Date Posted: 29 Apr 2010 at 5:07am

.... i was wondering the same thind i bought one last fall needs few springs belts aint bad... still not sure if i want to restore it or sell it.. don't know much about em