Farm Equipment - CA hydro's dangit.

Print Page | Close Window

CA hydro's dangit.

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11081
Printed Date: 23 Jan 2025 at 8:55pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: CA hydro's dangit.

Posted By: akmarty
Subject: CA hydro's dangit.
Date Posted: 15 Apr 2010 at 11:52am

My 52 CA runs great I just don't get to use enough.My problem is the lift,I can't seem to find the spot that the lift will stop raising.just repainted seat from damage 3rd link did to it.Is there some adjustment I'm missing or is it internal? it will almost stop but still creeps up or down slowly,seems to work fine otherwise,plenty of lift power.3 days ago it got me in the lower back and dented up the seat real bad.Any ideas what is wrong?
thanks Marty

Replies:

Posted By: CTuckerNWIL
Date Posted: 15 Apr 2010 at 1:17pm

If the 3 pt is set up right you should be able to raise it all the way up without hitting anything. There is a hold position valve that should hold it part way unless it is not working properly, which sounds like the case. It sounds like the top link bracket is not positioned properly to allow full lift without hitting the seat.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: akmarty
Date Posted: 15 Apr 2010 at 8:43pm

Thanks Charlie I'll check that.